Gorilla Contact Adhesive (250ml) 2144101

Versatile DIY adhesive in an easy to spread formula.

Gorilla Contact Adhesive Tin is a fast drying, crystal clear and versatile DIY adhesive that holds in seconds* for a permanent bond Gripping instantly with no need to support*, it can be used on a variety of surfaces – even vertical ones. This spreadable formula comes in a tin, perfect for larger surfaces and bigger DIY projects. If you are looking for an adhesive for fabric repairs or crafts, the Gorilla Contact Adhesive Tube is more suitable.

• Holds in seconds
• No-run formula
• 100% waterproof
• High strength
• Permanent bond
• Flexible

1. Prepare

• Protect work area from spills. Ensure surfaces to be bonded are clean, dry and free from dust and debris.

2. Apply

• Using a spreader, apply a thin, even coat of adhesive to each surface to be bonded. Best results achieved when applied at room temperature.

3. Wait

• Allow for adhesive to partially dry before positioning surfaces (approximately 15-20 minutes).

4. Press

• Press surfaces firmly together when final position is achieved. Allow a minimum of 24 hours for a full cure. Cure time is dependent on the amount of adhesive applied and may increase with lower application temperatures and when used on non-porous surfaces.
  
  Clean-up and Storage: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from the surface. Replace lid tightly and store in a cool, dry place away from children and animals.