Gorilla Two-Part Clear Epoxy (25ml) 6044001

The crystal clear, gap filling, two-part adhesive.

Gorilla Epoxy delivers a strong, long-lasting bond to both household and automotive repairs. The easy-to-use syringe dispenses an equal amount of resin and hardener, that when mixed together creates a permanent, durable and water resistant bond.

The two-part, gap-filling Gorilla Epoxy formula sets in 5 minutes and easily bonds steel, aluminium, glass, wood, ceramic, tile and most plastics*. Plus it dries crystal clear, ensuring your projects look spotless. *Not recommended for use on polyethylene or polypropylene plastic or similar materials

• High strength
• Sets in 5 minutes
• Water resistant
• Bond withstands extreme temperatures

*Application Temperature 10°C to 37°C Cured Temperature -23°C to 82°C

1. Load

• Dispense resin and hardener onto a clean, disposable surface until they are both flowing equally. Even amounts of the resin and hardener can then be dispensed into a disposable mixing tray.
  
  The package blister can be used as a mixing tray for the first use. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up – this is a reaction that occurs as the resin and hardener combine.

2. Apply

• Apply mixture to surface within 5 minutes. Bond strength will decrease the longer you wait to apply. Remove any excess glue immediately from project surface with a dry cloth.

3. Press

• To achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes.
  
  Full cure achieved in 24 hours.