Makita DLX2176TJ LXT 18v Twin Pack (DHP481 & DTD154)

#PRODUCT DETAILS#
The DLX176TJ twin pack is a great value combo kit from Makita. For one price you'll get a DHP481Z Brushless Combi Drill, an outstanding hammer-driver drill with a single sleeve keyless chuck and electric brake.

Also included is the DTD154Z, a highly powerful impact driver featuring a brushless motor and variable speed control to enable you to drive screws effortlessly. Of course you'll also require the batteries to power these two brushless machines and in this pack are two 5.0Ah batteries and a compact charger to keep your equipment chugging along.

This kit is supplied with a MAKPAC type 3 connector case, a stackable carry case thats more than large enough to store all of these great products.

Kit Contents:
DHP481Z - A brushless supreme class hammer-driver drill powered by 18v Li-ion tech. Features forward/reverse rotation, and electronic brake and variable speed control.

DTD154Z - High powered impact driver with a brushless motor, LED job light and tightneing mode for self-drilling screws.

2 x BL1850B - Lightweight and shock-absorbing. The Li-ion range delivers 430% more working capacity during it's lifetime compared to Ni-Cad and is 40% Lighter than Ni-MH. The Li-ion has minimal depletion of power during use or in storage over it's lifetime.

DC18RC - This charger will charge one 5.0Ah battery to full charge in just 45 minutes. MAKPAC Connector Case (Type 3) - Stacking case with conecting clips, compatible with other makes of case systainer.
#SPECIFICATIONS#
BL1850B
- Quantity: 2
- Voltage: 18v
- Battery Type: Li-ion
- Charging time w/ supplied charger: 45mins
DC18RD
- Quantity: 1
- Voltage: 14.4v + 18v
- Type: Single Port (Li-ion)
- Charging time of the supplied batteries: 45mins
MAKPAC 3
- Type: Makpac Connector Case (Type 3)
- Height: 210mm
- Length: 396mm
- Width: 296mm
DHP481Z
- Voltage: 18v
- Battery type: Li-ion
- No load speed (Lo): 0-550 rpm
- Blows per minute (Lo) - ipm: 0-8250 ipm
- No load speed (Hi) - 0-2100 rpm
- Blows per minute (Hi) - ipm: 0-31,500 ipm
- Chuck capacity: 1.5-13mm
- Max. in wood: 76mm
- Max. in masonry: 16mm
- Max. in steel: 13mm
- Torque settings: 21 + drill
- Vibration K factor: 1.5 m/sec²
- Vibration: Impact drilling into concrete: 6.5 m/sec²
- Vibration: Drilling into metal: 2.5 m/sec²
- Max. fastening torque (soft joint): 60 Nm
- Max. fastening torque (hard joint): 115 Nm
- Weight (w/ batteries): 2.7 - 3.0kg
- Voltage: 18v
- Battery type: Li-ion
- Standard bolt: M5-M16
- High tensile bolt: M5-M14
- Coarse thread (length): 22-125mm
- Max fastening torque: 175 Nm
- Vibration: fastening bolt: 12.5 m/sec²
- Vibration K factor: 1.5 m/sec²
- Noise sound pressure: 96 dB(A)
- Noise sound power: 107 dB(A)
- Impact selection: 3 stage + Tek mode
- Driving shank: 6.35mm (1/4") Hex
- Machine screw: M4-M8
- No load speed (hard/med/soft): 0-3600/2100/1100 rpm
- Blows per minute(Hi) - ipm: 0-3800 ipm
- Blows per minute(Med) - ipm: 0-2600 ipm
- Blows per minute(Lo) - ipm: 0-1100 ipm
#SUPPLIED WITH#
1 x DHP481Z Combi Drill
1 x DTD154Z Impact Driver
2 x BL1850B Batteries
1 x DC18RC Charger
1 x MAKPAC3 Case
#ADDITIONAL INFORMATION#The supplied 5.0Ah batteries will reach full charge in just 45 minutes with the supplied charger. The DC18RC can only charge one battery at a time. If you wish to charge two simultaneously please see the DC18RD twin port charger in the related items below.
#VIDEO#