Makita LXT Brushless Combi Drill & Impact Driver Kit 18V DLX2412TJ

The DLX2412TJ Combo Kit features a Makita 18V LXT brushless combi drill (DHP486Z) and impact driver (DTD154Z) along with two 5.0Ah batteries, a compact charger and a Makpac type 3 connector storage case.

DHP486Z LXT Combi Drill

The 18V LXT® Brushless Cordless 1/2” Hammer Driver-Drill (DHP486Z, tool only) breaks new ground with a full 1,250 in.lbs. of Max Torque for the most demanding drilling and driving applications and 0-31,500 BPM for faster hammer drilling into masonry materials. The DHP486Z is positioned at the top of the LXT line-up of driver-drills.

The DHP486Z has a more compact and ergonomic design, 14% shorter than the previous model. It's powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. With a 2-speed transmission (0-550 & 0-2,100 RPM), the DHP486Z can tackle a wide range of drilling, fastening and hammer drilling applications. Other features include an all-metal 1/2” self-ratcheting chuck for improved bit-gripping strength, L.E.D. lights, and a rubberized soft grip for increased comfort.

Features:

• Belt clip
• LED job light
• Electric brake
• Brushless motor
• Metal gear housing
• 2 mechanical gears
• Forward / reverse rotation
• All metal gear construction
• Variable speed control by trigger
• Best possible ergonomic handle for drill-driver applications
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand

• LED job light
• Electric brake
• Brushless motor
• Ergonomic soft grip
• Compact overall length
• Forward / reverse rotation
• Variable speed control by trigger
• T-mode: Tightening mode for self-drilling screw
• Electronic 3-stage impact power selection (Hard/Medium/Soft)

• Voltage: 18 V
• Chuck capacity: 1.5-13 mm
• No load speed (Hi): 0-2100 rpm
• No load speed (Lo): 0-550 rpm
• Blows per minute (Hi): 0-31500 ipm
• Blows per minute (Lo): 0-8250 ipm
• Max. in wood: 76 mm
• Max. in masonry: 16 mm
• Max. in steel: 13 mm
• Torque settings: 21 + drill
• Battery type: Lithium-ion
• Max. fastening torque (Soft joint): 65 Nm
• Max. fastening torque (Hard joint): 130 Nm
• Weight: 2.7 kg

• Voltage: 18 V
• Standard bolt: M5-M16
• High tensile bolt: M5-M14
• Coarse thread length: 22-125 mm
• Max. fastening torque: 175 Nm
• Impact selection: 3 stage + Tek mode
• Driving shank: 6.35 mm (1/4") Hex
• Blows per minute (Hi): 0-3800 ipm
• Blows per minute (Med): 0-2600 ipm
• Blows per minute (Lo): 0-1100 ipm
• Machine screw: M4-M8
• No load speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm
• Weight: 1.5 kg

• (1) Side handle
• (1) Depth stop
• (1) Belt clip

• (1) Belt clip