Makita LXT Brushless Combi Drill & Impact Driver Combo Kit 18V (2x 5.0Ah) DLX2221ST

The 18V LXT® DLX2221ST Combo Kit features the DHP483 Brushless Combi Drill, the DTD155Z Brushless Impact Driver, two 5.0Ah 18V batteries and a charger.

The DHP483Z is capable of delivering up to 25,000 ipm for fast hammer drilling into masonry materials, 1,700 rpm, 40 Nm maximum fastening torque (hard joint) and 23 Nm maximum fastening torque (soft joint) for a wide range of drilling, fastening and hammer drilling applications. The drill is equipped with 2 mechanical gears; high speed mode for speedy drilling in light duty applications and low speed mode for heavy duty applications requiring high torque and 20 torque settings plus drill mode for added fastening control.

The DTD155Z is a cordless Impact Driver, with variable speed control, powered by 18V Li-ion battery to supply energy to the brushless motor to deliver up to 3,000 rpm, 3,900 ipm and 140 Nm of maximum tightening torque for a wide range of fastening applications. The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life, and optimises battery energy use for up to 50 per cent longer run time per charge.The Impact Driver features 3 mode operation. Hard mode, soft mode and A-mode for a range of applications. The A-mode feature helps to eliminate "screw cam out” and "cross threading” by driving at low speed until the tightening begins. The DTD155Z has a convenient ¼” hex chuck for quick and easy bit installations and removal.

• Electric brake for increased operator safety
• Twin LED job lights to illuminate the work area
• Variable speed control to enable to user to match the speed to the application
• 13mm single sleeve keyless chuck to allow for quick and easy bit installations and removals with one hand
• 2 mechanical gears; high speed mode for speedy drilling in light duty applications and low speed mode for heavy duty applications requiring high torque

• Forward/reverse rotation
• Electric brake for increased operator safety
• Twin LED job lights to illuminate the work area
• Convenient 1/4” hex chuck for quick and easy bit installations and removal
• Variable speed control to enable to user to match the speed to the application
• 3 mode operation; hard mode, soft mode and A-mode for a range of applications

• Voltage: 18 V
• No load speed: 1700 rpm
• Torque settings: 20 + drill
• Impacts per minute: 25,000 ipm
• Max. fastening torque (soft): 23 Nm
• Max. fastening torque (hard): 40 Nm

• Voltage: 18 V
• Driving shank: 1/4" hex
• No load speed: 3000 rpm
• Machine screw: M4 to M8
• Standard bolt: M5 to M14
• High strength bolt: M5 to M12
• Impacts per minute: 3900 ipm
• Max. tightening torque: 140 Nm
• Coarse screw thread: 22 to 90 mm

• (2) BL1850B 5.0Ah Batteries
• (1) DC18SD Charger